Sometimes, after router setup and Netgear firmware update, it starts running at snail’s pace. It doesn’t connect to the internet or if connected, it doesn’t allow you access the internet to the fullest. Well, there can be various reasons that can lead to Netgear router not working issue. Perhaps your modem is the culprit or it can be your router itself.
But you don’t have to worry! This troubleshooting guide will not let you know the reasons behind Netgear router not working issue but also help you fix the issue in a jiffy. Let’s take the plunge!
What are the Reasons Behind Netgear Router Not Working Issue?
In the event that your Netgear router stopped working suddenly or acting weird, you first have to know the main reason behind it so that you can find a permanent solution to fix it. Given below are the main reasons that cause Netgear router not working issue. Continue reading!
-
The router antennas and the router’s internal hardware is damaged.
-
Your Netgear router is placed in blind spots.
-
Netgear firmware update isn’t performed correctly or the wrong firmware version is downloaded.
-
The wall plug is faulty or fluctuated.
-
Partial or incomplete Netgear router setup
-
Netgear router is not connected to the modem.
-
Modem not compatible with the router.
-
Signal-interference in the path of your router’s WiFi signals.
-
Your router is overheated or placed on a congested and lower area.
-
The Netgear device is placed too higher.
That’s all! These were the main reasons behind Netgear router not working issue, Now, allow us to make you familiar with the troubleshooting steps to fix the issue. Keep scrolling down!
Fix: Netgear Router not Working Issue
Walk through the instructions highlighted below and know how to resolve Netgear router not working issue in a fly.
Let’s start with the router placement first. It is suggested to place your Netgear device at the center-most area in your home.
-
Avoid placing your Netgear router under a table, inside a cabinet, near to thick walls and windows, on a congested (lower) and non-ventilated surface.
-
Do not place your router too closer to the modem. Doing so can clash their WiFi signals.
-
Make sure that your Netgear router is getting constant power supply from its wall outlet.
-
The wall socket you are using to plug in your Netgear router must be damaged and fluctuation-free.
-
Update the correct firmware version for your Netgear device using www.routerlogin.net or routerlogin.net web address.
-
Use only an up-to-date and load-free internet browser to access www.routerlogin.net or routerlogin.net web address.
-
Be sure that your Netgear router is configured properly.
-
Check the status of LEDs on your Netgear router. All the LEDs must be stable and green.
-
Cross-check the cable/ wireless connections you have made between your Netgear router, modem, PC, laptop, and mobile devices. They must be proper.
-
Disconnect unknown devices from your router’s WiFi.
-
Do not cover your Netgear router. Clean it regularly with a dry piece of cloth.
Still your Netgear router not working properly? Consider power cycling your Netgear router. To execute the process, follow the instructions in exact given order highlighted below:
-
First of all, disconnect your Netgear router from your PC, laptop, modem, and mobile devices.
-
After disconnecting, wait for a couple of seconds and then unplug your Netgear router from its wall outlet.
-
Relax for 5-10 minutes.
-
Plug your Netgear router back in.
-
Now, try to access www.routerlogin.net or routerlogin.net web address to see whether your Netgear device is working fine after power cycling or not.
Verdict
Anticipating that the troubleshooting hacks listed in the post have helped you out to fix Netgear router not working issue. If you still need assistance, simply drop your concerns into the comments section.
